This is a receive-only protocol which reads the heap usage data from a Prosody processor. It has no configuration options. It is only applicable for Prosody X.
This should be read in conjunction with the generic data communications documentation.
You must use #include "smdc_heap.h" to get the
appropriate declarations.
The protocol value is kSMDCProtocolHeap.
There is no configuration for this protocol, so the config_data pointer should be null (0) and the config_length should be zero.
This protocol does not use encodings, so the 'encoding' field must be set to the value kSMDCConfigEncodingNone.
The firmware module heapmon must have been downloaded.
[note] not useful - receiver is always connected.
This function is not applicable since it only applies to the output half of a channel.
This function is not applicable since it only applies to the output half of a channel.
Overrun is not monitored.
The received data consists of pairs of 32-bit words, least significant byte first, in each pair the first word indicating remaining space in SDRAM heap and the second word indicating remaining space in M2 heap.
This function is not applicable since it only applies to the output half of a channel.